Meters Add New Meter Point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link and then at the very bottom of the list, click the Add new Meter to [Organisation Name] link. If there is more than one Site you will be prompted to choose from a drop-down list and then clicking Go will bring up the Assets - New Meter Details page. Complete the information fields, consulting Appendix D as required and click the Save Changes link at the bottom of the page. To then configure the meter, see Add Meter Configuration under Energy/Utility Maps. Close Old Meter Note: This should only be done if the Meter is being decommissioned - otherwise the Configuration is probably what you should be changing. If the Meter is in fact to be closed, point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link. Click the [Local ID] link of the required meter, using Search to find it if required, and tick the Close Meter button. On then clicking the Save Changes link, boxes appear for the Close Date to be entered. Edit Meter Details Point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link. Click the [Local ID] link of the required meter using Search to find it if required. Change the information fields as necessary and click the Save Changes button. View Meter Consumption Point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link. Click the Consumption link of the required meter. Use Search to obtain the data for the required period of time. View Meter Details Point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link. Click the [Local ID] link of the required meter, using Search to find it if required. View Meters List - All of Organisation Point to the Quick Tab Asset Details link and in the drop-down menu click the Meters List link. Just below the heading at the top, you will find the Search box, which enables you to select a new list according to the various selection criteria available. Below the Search box and above the list itself, there is a dark blue block with the Results per Page heading in the upper left hand corner. Just beside the heading, a display setting can be chosen by clicking one of the available numbers between 5 and 100. (Default setting is 20.) Immediately below that, the system shows the range of results displayed out of the total number. On the lower right hand corner of the block, there is scope to scroll between pages or choose a particular page number. View Meters List - One Site Only Point to the Quick Tab Asset Details link and in the drop-down menu click the Sites List link. Click the Meters link for the required site. Just below the heading at the top, you will find the Search box, which enables you to select a new list according to the various selection criteria available. Below the Search box and above the list itself, there is a dark blue block with the Results per Page heading in the upper left hand corner. Just beside the heading, a display setting can be chosen by clicking one of the available numbers between 5 and 100. (Default setting is 20.) Immediately below that, the system shows the range of results displayed out of the total number. On the lower right hand corner of the block, there is scope to scroll between pages or choose a particular page number.